Hangzhou Qianrong Automation Equipment Co.,Ltd
Hangzhou Qianrong Automation Equipment Co.,Ltd. focus on ultrasonic application, in good faith to win customers
Add to Cart
Ultrasonic Semiconductor Wafer Coating
Description:
Wafer coating is a unique process that facilitates the automatic application of chip bonding adhesives at the wafer level, followed by the formation of chip bonding films in the next stage. FUNSONIC's ultrasonic semiconductor wafer coating technology is suitable for wafer coating, which can achieve process speed, thickness control, and material uniformity. After the hot or UVB stage and wafer cutting, chip connections are achieved through heating and pressure to produce consistent adhesive lines and small, controlled corners.
Ultrasonic semiconductor wafer coating technology needs to consider spraying parameters during use, such as ultrasonic frequency, spraying speed, and coating thickness, which need to be optimized according to specific materials and requirements; At the same time, material properties can also have a certain impact on the spraying effect, such as the viscosity, surface tension, and volatility of the coating, which need to be considered when selecting materials.
Parameters:
| Product Type | Intelligent Ultrasonic Precision Coating Machine desktop Type FS620 |
| Spray Nozzle Operating Frequency | 20-200Khz |
| Nozzle Power | 1-15W |
| Continuous Spraying Volume Max | 0.5-10ml/min |
| Effective Spraying Width | 2-20mm |
| Spray Uniformity | ≥95% |
| Solution Conversion Rate | ≥95% |
| Dry Film Thickness | 20nm-100μm |
| Solution Viscosity | ≤30cps |
| Temperature Range | 1-60℃ |
| Atomized Particles (Median Value) | 15-40μm (distilled water), determined by the frequency of the nozzle |
| Diversion Pressure Max | ≤0.05MPA |
| Input Voltage | 220V±10%/50-60Hz |
| Exercise Mode | XYZ three-axis, independently programmable |
| Control Mode | FUNSONIC spraying control system, PLC control, 13.3-inch full-color touch screen |
| Control Content | Ultrasonic spraying, liquid supply, heating, ultrasonic dispersion and other systems |
| Liquid Supply Method | Precision injection pump |
| Ultrasonic Dispersion System (Optional) | 20ml or 50ml, 40K, biological grade sampler |
| Rated Power of Ultrasonic Dispersion System | 100W |
Application :
1. Coating of photosensitive layer:
In photolithography, ultrasonic technology is used to uniformly coat photosensitive materials, ensuring high-resolution pattern transfer.
2. Protective coating:
Apply anti-corrosion and scratch resistant protective coatings to enhance the durability of the wafer.
3. Functional coating:
In certain applications, functional materials with specific electrical or optical properties can be coated.
Ultrasonic Semiconductor Wafer Coating