Enhancing Production Rate Ultrasonic Welding Machine For Nonwoven By 35Khz Ultrasonic Sealing Technology\

Enhancing Production Rate and Good Quality by 35Khz Ultrasonic Sealing Technology ​​


Description:

The ultrasonic system is mainly composed of ultrasonic generator and ultrasonic transducer. The ultrasonic transducer is a sandwich transducer made of lead zirconate titanate piezoelectric ceramic material. The piezoelectric ceramic material has an electric field effect. Under the phenomenon of dimensional change, the transducer generates mechanical vibration under the action of an alternating electric field.
Ultrasonic system normal condition: The normal vibration group (transducer + horn) has a current of 0.3A~0.8A and an amplitude of 1%~10%.


Specifications:

Device installation:

1. Disassemble the package, check the surface and parts of the equipment for signs of damage, check whether the screws are loose, whether the electrical connectors are locked, and whether the accessories are complete.

2. Ultrasonic lace machine equipment should be placed on a flat hard ground, requiring the lace machine to be at least 0.5 meters away from the heat source, and to ensure that the lace machine has at least 1 meter before and after, and at least 0.5 meters of space for operation.

3. Check the voltage requirements on the back of the vibration box and ensure that the system is well grounded.

4. Connect the device to the power supply and air supply. Be sure to turn off the power switch first. Pay attention to the voltage requirements of this unit: AC220V, 50-60Hz

5. The air line is connected to a clean, non-lubricated compressed air source with a rated working pressure of 0.6 MPa.

Enhancing Production Rate and Good Quality by 35Khz Ultrasonic Sealing Technology